I did this repair many years ago after the mounting failed on the X-300 (original single bold stub mast) which allowed the antenna to sway. It gave a few more years of service after the repair and mounting modification and was only taken down to be replaced with a new X-510 which has the same mounting modification.
The X-510 has been up for many years with no issues despite being battered by the winds and salt coming off the North Sea.
Continue reading “Diamond X-300 repair”
A common fault on the SGC range of antenna tuners is a reduction in receive performance as they get on in years. This can be attributed to contamination on the relay contacts since SGC stoped using fully sealed relays. Any small condensation inside the tuner makes it’s way into the relays and causes contamination on the contacts as they are hot switched. The best thing to do is to replace all 26 relays with new units…
Continue reading “SGC-230 relay replacement”
I purchased my trusty SGC-230 Smartuner around 8 years ago as a faulty unit and soon got it back up and running with a new binary counter IC. It’s worked great since then but has always had a cracked ceramic post on the output terminal. It was one of the jobs I wanted to do but I never got around to finding a new post so when I had time to replace it, I never had the part handy. Continue reading “SGC-230 Ceramic post replacment”
The Kenwood TM-V71 is a great dual band mobile set that is at home in the car or the home shack. It’s packed full of great features and has a good power output of 50W on both VHF and UHF. I’ve owned Icom, Yaesu and Kenwood dual banders and I just love the TM-V71 so it’s no surprise that I snapped up an ebay bargain for a faulty one (dated 2009) when I saw it. Continue reading “Kenwood TM-V71 Filter Issue”