GPS Data for Icom IC-9700

Don’t want to build your own? I now sell these and an alternative design with a better, fixed external unit on my shop!

The Icom IC-9700 has a GPS data input available but no oficial accessory from Icom. It’s a 2.5mm TRS connection that allows users to connect a GPS unit with an RS232 output to the IC-9700 and use that data for DSTAR transmission. There are several GPS units on the market that can provide the data but they are often expensive standalone units or cheaper, older generation units with lower sensitivity and performance when it comes to tracking GPS satellites. Continue reading “GPS Data for Icom IC-9700”

External GPS for TM-D710

I’ve been running my TM-D710 in the car for a while using a Garmin GPSMap 60CSX which works well but does add clutter to the dashboard and is just another device to remove when leaving the car in a public place. I could upgrade to the newer TM-D710G but I can’t justify the £550 price tag just to get a built in gps so I have decided to add a gps unit to my existing unit.
Continue reading “External GPS for TM-D710”

Diamond X-300 repair

I did this repair many years ago after the mounting failed on the X-300 (original single bold stub mast) which allowed the antenna to sway. It gave a few more years of service after the repair and mounting modification and was only taken down to be replaced with a new X-510 which has the same mounting modification.

The X-510 has been up for many years with no issues despite being battered by the winds and salt coming off the North Sea.
Continue reading “Diamond X-300 repair”

TM-V71 fan upgrade

This is a simple modification that takes around 5 minutes but makes a big improvement to the already great TM-V71. The fan on this radio is very loud and runs at full speed from the moment you press the PTT then stays on for a few minutes after you release the PTT. This isn’t a problem in a mobile setting where there is usually more background noise but it is very loud when using the TM-V71 in a quiet home shack.
Continue reading “TM-V71 fan upgrade”

Kenwood TM-V71 Filter Issue

The Kenwood TM-V71 is a great dual band mobile set that is at home in the car or the home shack. It’s packed full of great features and has a good power output of 50W on both VHF and UHF. I’ve owned Icom, Yaesu and Kenwood dual banders and I just love the TM-V71 so it’s no surprise that I snapped up an ebay bargain for a faulty one (dated 2009) when I saw it. Continue reading “Kenwood TM-V71 Filter Issue”

TX audio chain

It started as a simple project to construct a switch box so I could use a single microphone with multiple radios in my home shack. It’s ended (although i’m not sure it will ever end!) with more knobs, buttons, switches and flashing lights that the flight deck of a Dreamliner.

I’m still experimenting and will be posting a walk through soon so stay tuned but for now, here’s a little picture…

M0LMK Audio Chain